Qooker install under a newly fitted belfast sink. Due to the height of the cylinder, the only option to fit it in was to cut a panel out of the base unit. Fitted, tested, all good. Fitment also included new pipework for hot and cold, including a feed for the dishwasher.
Client wanted a new kitchen sink fitted after renovations. They didn't want a standard sink, so chose this unique sink instead.
Working alonside a gas engineer, new boiler fitted and piped up. All required tests carried out and passed by engineer.
On the left - Previous plumber made a bit of a mess and didn't install this Insinkerator in correctly. It didn't work properly and there were parts missing.
On the right, After complete removal of all the fittings and essentially starting again. Refitted everything correctly, including fixing up the pipework behind and tidied up the space.
Client had a garden cottage built and needed hot water. An ariston water heater was perfect for this space. The builder left a cold water supply to the building. It was fortunately possible to fit all this into a single basin unit.
Call out to resolve a poor previous attempt by the builders at radiator fitment. The mix of isolators and plastic pipework meant the radiator didn't work too well, and visually looked terrible.
Removed all offending isolators and plastic pipe and replaced it with copper. The client did not want to damage the new flooring, so I had to follow the lines of the old pipework. Not aesthetically ideal, but a vast improvement.